WGR MAGNUM SWITCHER

PIPE SIZE: 8-36″ (203-914 MM)
INLET: 1″ AND 1-1/4″ NPT OR BSPP

  • Patented switcher technology
  • 2 Nozzles in 1: operate in either Pulling or Descaling mode with the same nozzle
  • Power off the pump to switch between modes while in the pipe
  • Utilize full pump power in each mode
  • Jet each mode by pressure/flows separately
  • 1600 hour extended service life
  • Handles recycled water

WGR SWITCHER RESOURCES

WGR SWITCHER MANUAL
WGR SWITCHER TOOL TALK

CONTROL CLEAN RESOURCES

CONTROL CLEAN MANUAL
CONTROL CLEAN TOOL TALK

NEW CONTROL CLEAN WGR HEAD OPTIONS

WGR SWITCHER HEAD OPTIONS

WGR SERVICE KIT OPTIONS

  • 1 x BJ 048-M Viscous Fluid, Medium – 6oz
  • 1 x GP 049.2 Cap, Syringe, Lock Cap
  • 2 x GP 049.1 Seal Spacer
  • 2 x WGR 006 Shaft Seal, Small
  • 2 x WGR 010 Shaft Seal, Large
  • 1 x WGR 076 O-Ring
  • 2 x WGR 009 Bearing, Ball, Open (SKF ONLY)
  • 6 x WHR 030 Torx Screw, 10-24 x 3/8, Pan Head, SS
  • 1 x TR200 121 O-Ring
  • 1 x WG 014 Wave Spring
  • 1 x BJ 062-S Antiseize, 2g
  • 2 x WG 008 O-Ring
  • 1 x BJ 048-M Viscous Fluid, Medium – 6oz
  • 1 x BC 410.15 Syringe
  • 1 x BC 415 Syringe Tube Assembly
  • 2 x BJ 026 Port Plug
  • 1 x WGR 058-M90 HP Seal, Shaft Side
  • 2 x WGR 050 O-ring, 85D
  • 1 x WGR 059-M90 HP Seal, Nut Side
  • 2 x WGR 052 Wave Spring
  • 2 x GP 805 Container, Round
  • 1 x BJ 062-S Antiseize, 2g
  • 1 x PL 533 WGR User Manual
  • 1 x BJ 048-M Viscous Fluid, Medium – 6oz
  • 1 x WGR 180 WGR 180
  • 1 x GP 049.2 Cap, Syringe, Lock Cap
  • 1 x GP 049.1 Syringe, Plastic, .68oz
  • 2 x WGR 011 Seal Spacer
  • 2 x WGR 006 Shaft Seal – Outer
  • 1 x WGR 076 O-Ring
  • 2 x WGR 010 Shaft Seal – Inner
  • 1 x GP 025-P2SS Hex Socket Plug, 1/8 NPT Male, SS
  • 2 x BJ 026 Port Plug
  • 2 x WGR 009 Bearing, Ball
  • 1 x WGR 058-M90 HP Seal, Shaft Side
  • 2 x WGR 050 Oring, 85D
  • 1 x WGR 059-M90 HP Seal, Nut Side
  • 6 x WHR 030 Torx Screw, 10-24 x 3/8, Pan Head, SS
  • 1 x TR200 121 O-Ring
  • 2 x WGR 052 Wave Spring
  • 1 x WG 014 Wave Spring
  • 2 x GP 805 Container, Round Hinged Lid
  • 1 x BJ 062-S Antiseize, 2g
  • 2 x WG 008 O-Ring
  • 1 x WGR 180 Magnum Shaft Lock Pin w/Ring
  • 1 x WGR 181 Removal Press Tube
  • 1 x WGR 182 Installation Press Tube
  • 1 x WGR 183 Hex Tool
  • 1 x WGR 184 HP Seal Install Tool
  • 1 x WGR 186 HP Seal Puller
  • 1 x SC287 105 2-1/
  • 2 x WGR 011 Seal Spacer
  • 2 x WGR 006 Shaft Seal – Outer
  • 1 x WGR 076 O-Ring
  • 2 x WGR 010 Shaft Seal – Inner
  • 1 x GP 025-P2SS Hex Socket Plug, 1/8 NPT Male, SS
  • 2 x BJ 026 Port Plug
  • 2 x WGR 009 Bearing, Ball
  • 1 x WGR 058-M90 HP Seal, Shaft Side
  • 2 x WGR 050 Oring, 85D
  • 1 x WGR 059-M90 HP Seal, Nut Side
  • 6 x WHR 030 Torx Screw, 10-24 x 3/8, Pan Head, SS1 x TR200 121 O-Ring
  • 2 x WGR 052 Wave Spring
  • 1 x WG 014 Wave Spring
  • 2 x GP 805 Container, Round Hinged Lid
  • 1 x BJ 062-S Antiseize, 2g
  • 2 x WG 008 O-Ring

FIND A DEALER

REQUEST A DEMO